# How do you check a new Ledger or Trezor is genuine? The recovery sheet has to arrive blank, and the maker's app still has to agree before any coin moves

> A Mercado Libre parcel, a gift, or a second-hand Ledger or Trezor stays empty until the sheet is blank and the maker's own app has passed.

- **Source:** https://ptycoin.com/en/posts/2026-11-17-hardware-wallet-genuine-check-before-first-use/
- **Published:** 2026-11-17
- **Category:** Guides
- **Author:** Camila
- **Tags:** self-custody, wallets, security, education, latam
- **Also published in:** [Español](https://ptycoin.com/es/posts/2026-11-17-hardware-wallet-genuine-check-before-first-use/)

---


The courier bag says Mercado Libre. [Ledger's buying guide](https://www.ledger.com/academy/topics/ledgersolutions/best-practices-to-securely-buy-ledger-signer) says the wrap can look untouched on a device that already carries someone else's words.

A birthday gift and a device from a cousin's drawer wait on the same checks. Buy from the maker or from a name on the maker's list. Until those checks pass, leave every coin where it is.

Passing these checks only tells you the box can go on to setup, and it is not financial advice about moving savings you cannot replace.

## Where do you buy a Ledger or a Trezor?

Order a Ledger from the maker's shop or from a name on the [reseller list](https://www.ledger.com/reseller). [The reseller article](https://support.ledger.com/article/Purchasing-from-an-authorised-reseller) says those sellers get stock through Ledger's own distribution. A package that arrives opened, resealed, or damaged is a stop, including when the seller was on that list. Contact [Ledger Support](https://support.ledger.com/) and leave the device unused.

On Amazon, the buying guide says to read Sold by and match it to the official storefront for your country. [The genuine-check guide](https://support.ledger.com/article/4404389367057-zd) counts official Amazon stores in Mexico, Spain, and other countries as official channels.

Order one from the [Trezor Shop](https://shop.trezor.io/), from the [Amazon storefront](https://www.amazon.com/stores/TrezorModelT/page/C198CDB2-A4DE-4E54-8B10-AE9904CCD33E) on the [safe-to-use page](https://trezor.io/support/troubleshooting/device-issues/is-my-device-safe-to-use), or from an [authorized reseller](https://trezor.io/resellers/). That page says to skip an unauthorized third party, because you cannot tell who handled the device.

If the seller sits outside those lists, run every check below anyway. [Choosing a card, a USB stick, or an air-gapped signer](/en/posts/2026-06-09-hardware-wallet-form-factors-latam/) is a separate decision.

## What should be in the box?

Lay the contents out before you power anything on.

On a Ledger, the Recovery Sheet is blank. The genuine-check guide says words already on that sheet mean the device is unsafe. [The pre-seed article](https://support.ledger.com/article/pre-seed-device-scam) says the same about a printed 24-word Secret Recovery Phrase, including a unit sold as ready to use. Write to Ledger Support. Do not send coins to it.

A PIN in the packaging is the same stop. So is a first boot that demands a PIN you did not choose. The genuine-check guide gives "Welcome to Ledger Nano S Plus" for that Nano. Flex, Stax, and Nano Gen5 show a welcome that names the model and then "your digital signer." You then choose a PIN of 4 to 8 digits.

The buying guide describes an unsolicited replacement from May 2021, with a letter telling the owner to migrate right away. The owner typed the 24 words into a bad app. If you did not order the box, do not plug it in. A genuine device never asks you to enter the 24 words on a computer, a phone, an app, or a website. [The recovery-sheet article](https://support.ledger.com/article/Recovery-sheet-versions-by-Ledger-device) says that includes support.

On a Trezor, match the box to the contents list on the safe-to-use page. On a Safe 7 the holographic seal covers the USB-C port and should be clean, firmly attached, and free of tears or residue. [The Safe 7 page](https://trezor.io/guides/trezor-devices/trezor-safe-7/authenticate-trezor-safe-7) says a damaged or missing seal means you pause and contact support. Safe 5 and Safe 3 seal the connector. Model T seals the USB-C port. Model One puts two holographic stickers on the box.

That Safe 7 page says the two wallet backup cards are completely empty. Words already written or printed mean you do not use the device. The safe-to-use page says every Trezor ships without firmware. If firmware is already installed, that page says not to use the device.

## How do you run the Ledger Genuine Check?

Install [Ledger Wallet](https://www.ledger.com/ledger-wallet) on a computer from that page. The app used to be called Ledger Live. On a phone, use the official Apple or Google listing. Skip a link in a chat, a TestFlight build, and a third-party store. The buying guide says a counterfeit can ship a modified app that reports the hardware genuine. How to spot that download is in the [fake-app guide](/en/posts/2026-08-11-spot-phishing-fake-wallet-apps/).

The Genuine Check is the cryptographic test Ledger Wallet runs during setup. Only a genuine secure element can produce the proof. [The hardware-integrity article](https://support.ledger.com/article/4404382029329-zd) says the check misses a physical change that leaves the original chip in place, which is why the buying guide tells you to buy from the shop or an authorized reseller.

1. On the security checklist in the [getting-started guide](https://support.ledger.com/article/4404389503889-zd), click Check my Nano if that button is on your screen. On a Nano, that page says to press both buttons so the app can reach the device. Continue when you see "All Good! Your Ledger device is genuine and ready to use with Ledger Wallet."
2. After setup, open My Ledger from the Profile menu. Each connection there runs a silent Genuine Check. The genuine-check article puts Profile in the top-right. [The guide for updating a new device](https://support.ledger.com/article/9305992683165-zd) puts it in the top-left on a phone and in the top-right on a computer.
3. To start one yourself, open Profile, then Settings, then Help, then Device Setup.
4. On a touchscreen model, the [touchscreen guide](https://support.ledger.com/article/13692454787613-zd) says to open My Ledger, tap the device, and read under the name and version. The line to find is "Your device is genuine."

Update the device only from inside Ledger Wallet. The [OS update guide](https://support.ledger.com/article/360013349800-zd) uses the Update button on the banner for a new OS, or My Ledger, once the app itself is current. Ignore a firmware link that arrived in a message.

## How does Trezor Suite check the device?

Install Trezor Suite from the [download page](https://trezor.io/trezor-suite) or from [the start page](https://trezor.io/start). The [download guide](https://trezor.io/guides/trezor-suite/download-verify-trezor-suite) warns that phishing sites can show up in search results, and says to download only from trezor.io or Trezor's GitHub. An iPhone cannot finish this setup over a cable. Use a computer for the first run.

The button names below come from the [Safe 3 setup guide](https://trezor.io/guides/trezor-devices/trezor-safe-3/get-started-with-the-trezor-safe-3). Other models have their own get-started page under trezor.io/guides. Stop if the screen already wants a PIN you never created.

1. Plug the device in. Suite shows "Connect & unlock your Trezor." Then it shows a device security check. Click Set up my Trezor.
2. Click Install firmware. The Safe 3 ships without firmware. Suite installs the signed version, and the device restarts.
3. Suite then runs a Secure Element authenticity check. Click Start and follow the device.
4. On a Safe 3 or a Safe 5, [the failed-check page](https://trezor.io/support/troubleshooting/device-issues/trezor-safe-device-authentication-check-failed) says to open Settings, then Device, and use the Security section to run it again. A failure shows "Your device may have been compromised."

Safe 5 and Safe 7 have their own setup pages. The Safe 7 page says its check runs the first time you connect.

The [firmware authenticity check](https://trezor.io/learn/security-privacy/how-trezor-keeps-you-safe/trezor-firmware-revision-check) is separate. It compares the firmware version and the RevisionID with the releases Suite knows, and it runs when you connect. A mismatch blocks Suite. Select Contact Trezor Support. Leave that check on, and leave [Device Check](https://trezor.io/learn/security-privacy/how-trezor-keeps-you-safe/trezor-safe-device-authentication-check) on.

On Android, the same Safe 3 guide says "Your Trezor is ready for setup", then "Let's get started", Install now, and Get started for a new wallet.

## Who generates the words?

The device does. You write them.

On a Ledger, the [Nano X setup page](https://support.ledger.com/article/360018784134-zd) says to choose "Set up as new device." Choose the PIN. The screen shows 24 words. Copy them, in order, onto the blank Recovery Sheet. [What those words control](/en/posts/2026-06-23-seed-phrases-explained/) is why they stay on paper. Do not photograph them, and keep them out of notes, chats, and cloud folders.

On the Safe 3 screen, choose Create a new wallet. Leave the Recover button alone on a first box. The device shows the words one at a time. Write each one, in order, on a blank card. A 2023 Safe 3 defaults to 12 words, and one from 2024 or later defaults to 20. Safe 5 and Safe 7 cards are printed for 20, Model T cards for 12, and Model One cards for 24. Write the count on the screen. Older cards say recovery seed, which the setup guide treats as the same list as wallet backup.

Then click Set PIN and enter it on the device. Use at least 4 digits, up to 50. Sixteen wrong attempts erase the wallet from a Safe 3, and [the secure-element page](https://trezor.io/learn/security-privacy/how-trezor-keeps-you-safe/secure-elements-in-trezor-safe-devices) says a Safe 5 resets after 16 and a Safe 7 after 10. The setup guide says you enter the backup only on the device.

Once the check has passed, prove the paper with a [practice restore](/en/posts/2026-08-18-practice-seed-phrase-restore/). Keep a second copy in another place. One sheet in one drawer is the failure in the [backup guide](/en/posts/2026-08-10-self-custody-without-single-point-of-failure/).

## What do you do if a check fails?

Stop. Do not send funds to any address on the screen, and do not type a phrase from the box into the device, the app, or a site. Do not hand the words, the PIN, or a passphrase to anyone who offers to check them.

Contact support at [support.ledger.com](https://support.ledger.com/). The recovery-sheet article says Ledger will not ask for the 24 words, including support.

If the Trezor is new and you have not initialized it, the [failed firmware-check page](https://trezor.io/learn/security-privacy/how-trezor-keeps-you-safe/trezor-firmware-authenticity-check-failed) says to stop and contact support. Use the Contact Trezor Support button, or open the [support page](https://trezor.io/support/).

Coins on an exchange can wait. After the app agrees, the [self-custody walkthrough](/en/posts/2026-06-05-self-custody-101-moving-crypto-off-exchange/) starts with a small test. Wait until it arrives, then send the amount you meant to move.

---

## Keep reading

- [Your phone was stolen and the wallet with your USDT is on it: what do you do first? The phone lock and the wallet password still sit in front of a thief who lacks the recovery phrase, and that time is how long you have to move the coins](https://ptycoin.com/en/posts/2026-11-10-phone-stolen-crypto-wallet-move-funds/index.md): The phone with your USDT wallet is gone. Lock it, restore the written phrase on a device you trust, move the coins to a new phrase, then cut the SIM, the exchange, and the email.
- [How do you disconnect a WalletConnect session that is still active after you closed the tab? MetaMask keeps the site under Permissions and Trust Wallet under Settings, and the site can still ask for a signature](https://ptycoin.com/en/posts/2026-11-03-walletconnect-disconnect-active-sessions/index.md): A closed tab can leave a WalletConnect session active. Disconnect it in MetaMask, Trust Wallet, Phantom, or Coinbase Wallet, then review token approvals as a separate step.
- [Is SMS 2FA enough to protect your crypto exchange account? The text code follows your phone number, and a SIM swap or port-out can move that number before the authenticator app, the withdrawal allowlist, and the anti-phishing code are on](https://ptycoin.com/en/posts/2026-10-27-exchange-account-2fa-withdrawal-allowlist/index.md): SMS codes follow the phone number, so a SIM swap can take them. Switch to an authenticator or a passkey, turn on a withdrawal allowlist, and set an anti-phishing code.

---

Source: PTYcoin — https://ptycoin.com/en/posts/2026-11-17-hardware-wallet-genuine-check-before-first-use/. Free to read and cite with attribution to ptycoin.com. AI-usage terms: https://ptycoin.com/en/ai-usage/
